Images show design concepts. Yours is printed with your own artwork.

Flags

Custom Feather Flags

A feather flag is a tall, narrow fabric flag with a curved top, sleeved over a flexible pole so it stays spread in still air and moves in wind, which is what makes it readable from a road or across a parking lot. Car dealers, restaurants, real estate agents, gyms and event organisers plant them at entrances, lot edges and tents. Send the height, single or double sided, where the flag stands (grass, pavement or indoors) and your artwork, and the quote lists the flag, the pole kit and the base.

Best forStorefront and grand-opening entrancesCar dealership lotsOpen houses and model homesFestival, race and event gates

Reads from the road in wind or still air
Single sided with a mirrored back, or double sided
Pole kit plus ground stake or cross base

Get a free quote in minutes

Size, quantity and email. We reply with pricing and options.

Ships to the USA and CanadaProof before printNo obligation

Specifications

Size	Flag panels from about 1.5 x 5.5 ft to 2.5 x 15.5 ft, standing roughly 8 to 17 ft with the pole; your quote confirms the exact sizes
Material	Knitted polyester flag fabric, light enough to fly in a breeze
Printing	Full-colour dye sublimation through the fabric, UV resistant
Hardware	Fibreglass or aluminum sectional pole kit; ground spike, cross base with water bag, or tyre base; carry bag
Sides	Single sided (artwork shows mirrored on the back) or double sided with a blockout liner between two printed panels
Proof	Digital proof at the final size before print

Popular sizes

About 8 ft overall (small)
About 10 ft overall (medium)
About 12 ft overall (large)
About 15 ft overall (extra large)

Any other size is printed to order; put yours in the quote.

Ordering

Minimum order: Stated on your quote; none is assumed
Lead time: Confirmed with your quote before you approve
Proof: Digital proof at the final size before anything prints
Artwork: What to send and how
Ships to: USA and Canada

Popular uses

Storefront and grand-opening entrances
Car dealership lots
Open houses and model homes
Festival, race and event gates
Farmers markets and food trucks
Trade-show booths and outdoor expos

How feather flags are made, sized and set up

The flag is printed by dye sublimation: the design goes onto transfer paper, then heat presses the ink into knitted polyester, so the colour is in the fibre and the fabric stays soft and light. The panel is sewn with a pole sleeve down the straight edge and a hem around the curve. A single-sided flag shows the artwork on the front and a mirror image on the back; a double-sided flag sews two printed panels around a blockout liner so both faces read correctly.

Choose the height by viewing distance and by where the flag stands. An 8 ft flag suits a sidewalk, a booth or an indoor lobby; 10 to 12 ft is the usual storefront and car-lot size; 15 ft and taller is for highway frontage or a festival field. Keep the text to a few words set vertically down the flag, with the logo near the top where it stays visible, and use a solid background colour so the flag is recognised before it is read.

Setup takes a few minutes: the sectional pole slides together, the flag sleeve slides over the pole, and the base goes into the ground or onto the floor. A ground spike screws into grass or soil; a cross base with a water bag or a weighted tyre base holds the flag on concrete, asphalt or an indoor floor. The flag rotates on the base so it turns with the wind instead of wrapping around the pole. Take flags down in storms and high winds.

Dye-sublimated polyester holds its colour through months of sun and rain, but a flag is a moving part: wind frays the hem over time, and the fabric fades sooner in strong sun than a printed banner does. Most businesses treat the flag as the consumable and keep the pole kit, ordering a print-only replacement when the flag looks tired. Machine wash cold, do not tumble dry, and store the flag dry to avoid mildew.

Make it yours

Options for feather flags

Single or double sided

A single-sided flag shows the design on the front and a mirror image through the back, which is fine for logos and short words. A double-sided flag sews two printed panels around a blockout liner so text reads correctly from both sides.

Base

A ground spike screws into grass or soil. A cross base with a water bag, or a weighted tyre base, holds the flag on concrete, asphalt and indoor floors. Say where the flag stands and the right base is quoted.

Pole kit or print only

The flag, the pole kit and the base are listed separately, so a first order includes everything and later orders can be the printed flag alone for a pole kit you already own.

Flag shape

The feather shape has a curved top and a straight pole edge. If the logo must stay flat in wind, a teardrop flag holds the panel taut; a rectangular flag shows a square layout.

How ordering works: quote, digital proof, print, then delivery to the USA or Canada. Nothing prints until you approve the proof.

FAQ

Feather Flags: questions answered

Still unsure? Ask a printing specialist.

Does a feather flag come with the pole?

A first order is quoted as the printed flag, the pole kit and the base, each as its own line, so you see what is included. If you already own a pole kit, ask for the flag only and give the kit size so the sleeve fits.

What stand or base do I need for a feather flag?

A ground spike for grass or soil, a cross base with a water bag or a tyre base for concrete, asphalt and indoor floors. Tell us where the flag stands on the quote form and the right base is included.

Can a feather flag be double sided?

Yes. A double-sided flag has two printed panels sewn around a blockout liner so the text reads correctly from both sides. A single-sided flag shows a mirror image through the back, which is fine for logos and short words.

How tall should a feather flag be for my business?

About 8 ft for a sidewalk, booth or lobby; 10 to 12 ft for a storefront or a car lot; 15 ft and taller for highway frontage or a festival field. Tell us how far away people see it and we suggest a height.

Can I buy just a replacement feather flag?

Yes. Give the height of your existing pole kit and the flag is printed to fit its sleeve. Flags wear before poles do, so a print-only reorder is the usual second purchase.

You may also need