Images show design concepts. Yours is printed with your own artwork.

Banners

Custom Vinyl Banners

A custom vinyl banner is a full-colour print on scrim-reinforced PVC vinyl, hemmed on all four edges and finished with grommets so it ties to a wall, fence, railing or stage. Stores, contractors, schools, churches and event organisers use them for grand openings, sales, sponsors and site notices. Send the width and height, where it will hang and your artwork, and you get a quote with a digital proof at final size before anything is printed.

Best forGrand openings and salesConstruction site noticesSchool and church eventsTrade show booth walls

13 oz scrim vinyl for indoor and outdoor use
Hemmed edges with grommets, pole pockets or wind slits
Any width and height, single or double sided

Get a free quote in minutes

Size, quantity and email. We reply with pricing and options.

Ships to the USA and CanadaProof before printNo obligation

Specifications

Size	Any width and height; 2 x 4, 3 x 6 and 4 x 8 ft are the most ordered
Material	13 oz scrim vinyl as standard, matte or gloss; 15 oz and 18 oz blockout available, and your quote states the weight
Printing	Full-colour, UV-resistant inks printed edge to edge
Finishing	Hemmed on all four edges; grommets every 2 to 3 ft, pole pockets or wind slits on request
Sides	Single sided; double sided on blockout vinyl so the back does not show through
Proof	Digital proof at final size before printing

Popular sizes

2 x 4 ft
3 x 6 ft
4 x 8 ft
2 x 8 ft
3 x 10 ft

Any other size is printed to order; put yours in the quote.

Ordering

Minimum order: Stated on your quote; none is assumed
Lead time: Confirmed with your quote before you approve
Proof: Digital proof at the final size before anything prints
Artwork: What to send and how
Ships to: USA and Canada

Popular uses

Grand openings and sales
Construction site notices
School and church events
Trade show booth walls
Sponsor and stage banners
Real estate listings

How a custom vinyl banner is made and used

Banner vinyl is a PVC sheet laminated over a woven polyester scrim, which is why it is sold by weight: 13 oz per square yard is the everyday grade, with 15 oz and 18 oz for heavier duty. The roll goes through a large-format printer that lays down UV-resistant inks across the full width, so a 4 x 8 ft banner prints as one piece with no seams. After printing, the edges are folded and heat-welded or sewn into a hem, and grommets are pressed through the hem.

Size follows the reading distance, not the wall. A line of 4 in letters is legible from roughly 40 ft, so a 3 x 6 ft banner over a shop door carries a short headline and a logo comfortably, while a 4 x 8 ft banner on a fence can hold a phone number and a second line. Matte vinyl is easier to read under lights and in photographs; gloss gives colours more punch outdoors. Your quote states the exact material and weight.

Hanging is a matter of tension. Indoors, zip ties or hooks through the grommets are enough. Outdoors, use bungee cords rather than rigid ties so gusts stretch the cord instead of tearing the grommet, fix every grommet rather than just the corners, and keep the banner flat against a surface. For an open fence or a windy site, add wind slits or switch to a mesh banner.

A 13 oz vinyl banner kept out of constant sun and wind stays readable for a long time; hung on an exposed fence it ages faster at the grommets and edges. Reinforced corners and heavier vinyl help on long-term installs. Roll the banner print side out for storage, never fold it, and wipe it with water and mild soap. Every banner is proofed at final size before printing so text sizes and margins are checked before the roll runs.

Make it yours

Options for custom vinyl banners

Grommets

Metal grommets are set through the hem, usually every 2 to 3 ft and in every corner, so rope, zip ties or bungees can hold the banner on a wall, fence or railing. Ask for closer spacing on a long banner that will be pulled taut.

Pole pockets

A sewn sleeve along the top, the bottom or both takes a pole, pipe or the crossbar of a banner stand. Tell us the pole diameter and the pocket is sized to it, with 2, 3 and 4 in pockets being the usual sizes.

Wind slits

Half-moon cuts let some wind through a banner that hangs outdoors on a fence or between posts. They reduce the sail effect at the cost of a little print area, and they do not replace mesh on a fully exposed site.

Heavier vinyl

For a banner that stays up for a season, or one that is read from both sides, ask for 15 oz vinyl or 18 oz blockout. Blockout has an opaque core so a double-sided print does not ghost through in sunlight.

How ordering works: quote, digital proof, print, then delivery to the USA or Canada. Nothing prints until you approve the proof.

FAQ

Custom Vinyl Banners: questions answered

Still unsure? Ask a printing specialist.

What sizes do vinyl banners come in?

Any width and height. The most ordered sizes are 2 x 4 ft, 3 x 6 ft and 4 x 8 ft, with 2 x 8 ft and 3 x 10 ft for storefronts and fences. Give us the space you have and the viewing distance and we suggest a size and letter height.

Do vinyl banners come with grommets?

Hems and grommets are the standard finish: grommets sit in every corner and every 2 to 3 ft along the edges. If you would rather hang the banner from a pole or a stand, ask for pole pockets instead; the quote lists the finishing you chose.

Can a vinyl banner be used outdoors?

Yes. Scrim vinyl and UV-resistant inks are made for outdoor use, and 13 oz is the usual outdoor grade. On a fence or anywhere wind hits the banner square on, ask for wind slits or consider a mesh banner, which lets air pass through.

Should I order single or double sided?

Single sided when the banner hangs against a wall or fence. Double sided when it hangs in the open, across a street or from a ceiling, in which case it is printed on blockout vinyl so one side does not show through the other.

Can a vinyl banner be used on a banner stand?

Yes. For an X-stand or an adjustable backdrop stand, order the banner with pole pockets sized to the stand's crossbar, or with corner grommets for an X-stand's hooks. Tell us the stand type and the banner is cut to its graphic size and proofed at final size before printing.

You may also need